100% Pure Brass Water Valve 2W040-10
|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||7 Days|
|Productivity:||100000pcs per month|
|Place of Origin:||Ningbo,China|
|Supply Ability:||100000pcs per month|
Model No.: 2W040-10
100% Pure Brass Water Valve 2W040-10
Brass solenoid valve is an actuator used in the industrial process automation control system. It can automatically open or close the valve after receiving the electric control signal to realize the on/off or flow regulation control of the fluid medium in the pipeline, so as to automatically adjust or remotely control the temperature, flow, pressure and other parameters in the system.Water solenoid valve for water or liquid as the working medium, can be automatically controlled or remote system water, oil, liquid and other working medium pipeline on and off.
Because this valve USES the rubber seal, therefore the team work medium cleanliness greatly reduces, has opens and closes quickly, the reliability high characteristic.Used in medical machinery, solar energy, cleaning equipment, food machinery, burner, welding cutting, fire safety, environmental protection water treatment, machinery manufacturing and other industries.
Solenoid valves for water are divided into common type and explosion-proof type according to the service environment, and the default is common type. According to the medium is divided into normally closed and normally open, the default is normally closed.
The voltage is DC24V, AC220V, etc. The default is AC220V.
Detailed Information of 2W040-10 in the form
Working Medium Air,Water,Oil,Gas Motion Pattern Direct Drive Type Type Normal Close Type Aperture of Flow Rate Joint Pipe Bore 3/8" Operating Temperature Rang -5~80 Voltage Range ±10% Operation Fluid Viscosity 20 CST(below) Working Pressure(kgf/cm Gas:0~7, Oil:0~5, Air:0~7, Water:0~5 Material of Oil Seal NBR,EPDM Or Viton
The coil case of 2W040-10
Direct Drive Type
Normal Close Type
Aperture of Flow Rate
Joint Pipe Bore
Operating Temperature Rang
Operation Fluid Viscosity
Gas:0~7, Oil:0~5, Air:0~7, Water:0~5
Material of Oil Seal
NBR,EPDM Or Viton
The inner hexagon screw of 2W040-10
Notes for installation of brass solenoid valve
1, brass solenoid valve installation should pay attention to the arrow valve body should be consistent with the flow of media. Do not install it where there are direct drops or splashes. Brass solenoid valve should be installed vertically upward.
2. The brass solenoid valve shall be guaranteed to work normally within the range of 15%-10% fluctuation of the rated voltage of the power supply.
3, brass solenoid valve installed, the pipeline shall not have the reverse pressure difference. It needs to be electrified several times to make it warm before it can be officially put into use.
4, brass solenoid valve installation should be thoroughly clean the pipeline. The medium through should be free from impurities. Install strainer before valve.
5, when the brass solenoid valve failure or cleaning, in order to ensure that the system continues to operate, should be installed bypass device.
1.Solenoid valve is generally directional, can not be installed in reverse, usually on the valve body with "" to indicate the direction of medium flow, installation should be
in accordance with the direction of" "instructions
2.Manual shut-off valve should be added before and after the solenoid valve, and a bypass should be set to facilitate the maintenance of solenoid valve in case of failure.
3.If the media will water hammer phenomenon, then should choose a waterproof hammer function of the electromagnetic valve or take the corresponding preventive measures.
4.Before taking over, flush the pipe with pressure of 0.3mpa to remove metal powder, sealing material residues and rust in the pipe. Pay attention to the cleanliness of the
medium, if the medium is mixed with grime, impurities and other obstacles to the normal work of the solenoid valve, the pipeline should be installed in the filter valve
(filter mesh 60 mesh).
5.Steam solenoid valve inlet side should be equipped with steam trap, where the pipe should be tilted,
6.Solenoid valve should not be installed in the low concave part of the pipe, installed in the discharge pipe of the container, pay attention not to be drawn out from the
bottom of the container, but should be installed in the lower part of the container.
7.Take care not to use too much sealing material when taking over.
8.Try not to let the solenoid valve in the power state for a long time, so easy to reduce the coil life or even burn out the coil, that is to say, often open, often closed
solenoid valve can not be used interchangeably.
Waiting for your kind inquiry
NINGBO BRANDO HARDWARE CO.,LTD
BRANDO is a professional manufacturer and designer of Solenoid Valve, Solenoid Valve Coil and Solenoid Valve Armature Assembly, located in Ningbo, China. And we can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.
BRANDO maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.
BRANDO has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.
2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.
3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.
1. Solenoid Coil
2. Solenoid Coil Connector
3. Solenoid Valve Armature Assembly
4. Solenoid Valve Timer
5. Brass Solenoid Valve
6. Stainless Steel Solenoid Valve
7. Plastic Solenoid Valve
8. Pneumatic Cylinder
9. Pneumatic Valve
10. Pneumatic Hose Fitting
11. Refrigeration Solenoid Valve
12. Pulse Jet Valve
13. Diaphragm Repair Kit
14. Pulse Controller
15. Air Compressor Auto Drain Valve
16. LPG CNG Injector Rail
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Hose Fittings , Pulse Jet Valves , Refrigeration Solenoid Valves
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products